Enables the failsafe feature for the channel, with the specified failsafe time.
Enabling the failsafe feature starts a recurring failsafe timer for the channel. Once the failsafe is enabled, the timer must be reset within the specified time or the channel will enter a failsafe state. For Motor Velocity Controller channels, this will disengage the motor. The failsafe timer can be reset by using any API call except for the following:
MotorVelocityControllerRescaleFactorFor more information about failsafe, visit our Failsafe Guide.
DCC1020_0 (ver: 103) Velocity Controller : Supported
DCC1120_0 (ver: 104) Velocity Controller : Supported
|
|
Device In Device # Identification |
|
|
error in (no error) error in can accept error information wired from VIs previously called. |
|
|
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
|
code code is the error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
|
source source describes the origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
|
Failsafe Time Failsafe timeout in milliseconds Units: milliseconds (ms) |
|
|
Device Out Same as Device In |
|
|
error out error out passes error or warning information out of a VI to be used by other VIs. |
|
|
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
|
code code is the error or warning code. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
|
source source describes the origin of the error or warning. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
